Back to Learning Center
Reference

Stud Welding FAQ

5 min readMay 2026

Common questions about stud welding answered in plain English.

What is stud welding?

Stud welding is a process used to weld a metal stud, pin, or fastener directly to a base material.

What is the difference between CD and arc stud welding?

CD welding is typically used for smaller studs and thinner material. Arc stud welding is typically used for larger studs, structural steel, headed shear studs, DBAs, and heavier base material.

Can you weld studs through metal deck?

Yes. Headed shear studs are commonly welded through metal deck into steel beams on composite floor projects. The deck, beam, ferrule, equipment, and settings must be correct.

Can you stud weld galvanized studs?

Galvanizing can contaminate the weld. Structural studs are typically welded bare, then corrosion protection is handled based on the project requirements. Always confirm the correct process before welding coated or galvanized material.

Can you weld to painted or primed steel?

Paint, primer, galvanizing, oil, grease, heavy rust, and moisture can interfere with stud welding. The weld area generally needs to be suitable clean metal unless the project procedure specifically allows the condition.

Can threaded studs be bend tested?

Threaded studs are often not ideal for bend testing because the threads can be damaged. Torque testing, tension testing, or another approved method may be required depending on the project.

Why did my stud weld fail?

Common causes include poor ground, dirty steel, wet ferrules, incorrect settings, wrong ferrule, worn gun parts, low power, long cable runs, or incorrect technique.

Do I need a generator for arc stud welding?

Many field arc stud welding jobs require a proper generator or power source sized for the stud diameter, cable length, and production needs. Large headed studs and dual-gun systems require more power.

Do I need AWS D1.1 paperwork?

If the project is structural and AWS D1.1 is specified, a WPS, testing, and inspection requirements may apply. Always confirm with the project documents and inspector.

Can Stud Welding Products help me choose equipment?

Yes. Send the stud size, base material, thickness, jobsite location, quantity, and application. We can help recommend the right welder, rental package, ferrules, studs, and accessories.

Ready to Rent?

Put This Knowledge to Work

Every machine we rent is pre-calibrated to your stud specs before it ships. Get an exact quote for your next job.